Using sketchup for landscape design

Using sketchup for landscape design

Materials: (1.5 sheets) 3/4 plywood (for a nicer look, consider cabinet grade plywood) (100) #8 x flathead screws (8) 3 x 1/4 lag screws (8) 1/4 washers Wood glue Tools: Many of the cuts can be made using a circular saw. If you take that route, I suggest using guides to ensure perfectly straight cuts, because circular saws are otherwise difficult to control. We use our table saw and mitre saw, because they make the cuts much easier, since we.…More →

Place a small table closer to wall

Place a small table closer to wall

The upper cleat needs to have an angled backside, from which you will hang the vertical supports. You want the width on the longest side to measure 5, and cut it at a 45 angle. This will make the shorter side approximately. Tip from Experience: Looking back, place a small table closer to wall both the upper and lower cleats could have been identical table (5 tall with a 45 angle) to better distribute the weight. The design this lumber.…More →


<< < 991 992 993